Railway Carriage Spare Parts
A
B
- Basic plate for inspection plate
- Bearing pin for hinge latch UIC 6544
- Bevel gear
- Bogie
- Bogie bushings
- Bols according to DIN 5526
- Bolt according to UIC 3.00.03.07
- Bolt for ISO container, collapsable
- Bolt for swivel stanchion according to UIC 6543
- Bolt security
- Bolts for traction gear, for bolster shock absorber
- Bolts with head and threaded plugs
- Bow handle A 10 x 150 DIN 1585
- Bracket according to DIN 37081
- Bracket according to drawing 3 Fwg 652.0.21.007.024
- Bracket for Y-bogie
- Bracket ring
- Bridge for wheel set guide
- Buffer for draw hook limit
- Buffer spring
C
- Cable hook UIC 3194
- Cap for draining screw
- Cap nuts
- Capstan screw nut
- Castellated nut DIN 30389 / DIN 935 etc.
- Catch
- Catch of the steel pipe joint half coupling
- Center ring
- Centre casting and accessories
- Centre pin
- Clamping pins for coupling-screw lever
- Collar nut DIN 5903
- Collet according to DIN 1481
- Compression cover
- Compression plate
- Compression spring
- Conical springs
- Connection for brake coupling
- Control bolts
- Corner step/end step with rust, galvanised
- Counter bearing for centre casting
- Coupler
- Coupling adaptor
- Coupling handle
- Coupling links
- Coupling muff connection for traction gear
- Cross head for braking draw bar
- Cross sleeper handle
- Cylinder and anchor point handle, complete
- Cylindrical roller bearing
D
- D link
- Damping ring
- Decal
- Discs, washers
- Door latch bar
- Door latch gudgeon, lower - for door latch bar
- Double spring cotter pin
- Draw bar for step cover of the folding hinged door
- Draw bar for traction gear
- Draw hook with collar
- Draw hook with fork piece
- Draw hook with screw thread
- Draw hook wtih eye
- Draw-bar guide
- Draw-bar spring
- Draw-hook pin and accessories
- Drawgear-spring plate
- Dust shield, complete for storing boxes
F
G
- Gap safety pin for tie bolts
- Gleitstückträger
- Gudgeon for plate
- Guide frame for warning signs
H
I
L
N
P
R
- Rail clip for floor anchoring
- Rail hooks, remote controllable PROTECOTR S48-I
- Rail pad for safety brake sling
- Rail spike for centre pins
- Ram for resilient side bearer
- Retaining washer
- Rivets
- Roller bearing - housing
- Roller bearing wheel set and accessories
- Rollers
- Roof arch
- Round nut
- Rubber plate with rain angle
- Rubber sheeting
S
- Saddle washer according to DIN 34493
- Safety button
- Safety catch for catch bolt
- Safety catch for side wall swivel stanchion
- Saftey ring for catch bolt
- Screw coupling and parts
- Screw, 6-edged
- Screw, vertical
- Sealing
- Sealing made of felt
- Sealing ring
- Selflocking hexagon-head nut
- Shot shunting signals
- Shunting coupling
- Shuttle plate for secondary suspension
- Signal bracket (housing for signal bracket)
- Slide bearer bracket
- Slide bearer made of plastic
- Slide bearer made of steel
- Slide bearer, springy for Y-power bogie
- Slide chair for draw-bar guide
- Slide inlay
- Slide plate made of steel
- Slide plates made of manganese
- Slide plates made of plastic
- Slit ring
- Slotted nut
- Sockets (press in sockets)
- Sockets (shrinking sockets)
- Sockets according to DIN 1552
- Sockets according to DIN ISO 3547
- Sockets for spring band plugs
- Splint pin DIN 94
- Spring band
- Spring baseplate according to DIN 34016
- Spring bolt
- Spring cap for setting adjuster
- Spring distance plate
- Spring element
- Spring hood
- Spring saddle plate according to DIN 5543
- Spring shackle
- Spring tension screw
- Spring washer
- Spring-ram
- Stanchion
- Stanchion according to UIC
- Stanchion bag
- Steam heating shut off valve
- Steam heating-hose coupling
- Step bearing for traction gear divided
- Step grid and accessories
- Step sheeting for a folding hinged door
- Stirrup handle
- Stop-sleeve for traction gear
- Strap for air tanks
- Striker
- Support frame for pair of wheels
- Support pin
- Suspension bracket
- Suspension ring bolt
- Suspension ring hanger
- Suspension ring stone
- Suspension ring/chain link
- Suspension rod
- Swivel stanchion bolts
- Swivel stanchion impact according to UIC 6539
- System for ecuring the final position
T
- Tab washer according to BN 208 012 Part 6
- Tank plate
- Tensioning belt base
- Tie bolts for traction gear
- Tie sockets
- Tommy nut according to DIN 26020
- Tooth plate for wheel set guide
- Towel holder
- Traction gear and accessories
- Traction gear bracket
- Traction stop
- Trailing box for divided traction gears
- Trunnions
- Tube support
W
- Wagon stanchions
- Washer DIN EN ISO 4759-3 (former DIN 522)
- Waste container
- Wear plate
- Wedge for rubber sprung locking clamp
- Weight transfer ring
- Weld-on end according to DIN 2441
- Weld-on ends for draw bar
- Welding ends for draw hooks
- Wheel set bearing case
- Wheel set data rings
- Wheel set data tapes
- Wheel set guide
- Wheel set holder
- Wheel tapping hammer of the DB
- Wheelset tape
- Wool wick for power bogie lubrication
Gudgeon for plate
Zapfen für Platte
nach Zeichnung 3 Fwg 707.0.12.034.027 6. Ausgabe - 05/03
aus Werkstoff GS 52 - Rohteil